There is a popular misconception about locksmiths in Robin Hood. Many people think that if they lose their keys then the local Locksmith can come to their location, look at the lock, make a mould somehow and then produce a new key. Unfortunately, this is just not the case. If you lose your keys and you don’t have a spare, then the only option that the Robin Hood locksmith has is to replace the lock. This is where the real cost comes in for a locksmiths services, you are not only paying them for their time and labor, you are also paying for the products that they use to replace your lock.
In most cases locksmiths will carry around everything they need to service their customers. This means that their trucks or cars have replacement deadbolts, doorknobs and even key columns for your car. There may be some occasions that they do not have the necessary items to replace a lock, but overall they will have everything that they need. This does not mean that you have to use them to replace the locks. You can have them remove the old lock and you can do the rest if you like. However, if you aren’t handy, this isn’t recommended.
Now, if you are in a situation where you have broken your key in your lock, then this might be a salvageable situation. Most Leeds Locksmiths can piece together a broken key and make a new key from the broken one. However, the condition of the key is important. If you break the key and there are several pieces and some are slivers, then even the best locksmiths may not be able to do anything with it.
Bent keys are also able to be copied by Mobile Locksmiths. However, in most cases you can take a bent key into a locksmith shop rather than calling a locksmith to you. This depends, of course, on whether the bent key is for your transportation. It is important for you to not attempt to straighten the key yourself as you may end up breaking it or causing enough damage to it to prevent a copy from being made.
Home Security Tips - Upgrades to Doors and Locks That Can Help Prevent Home Burglaries
In this article we are attempting to uncover the mystery of those fantastical, sometimes awe and question inspiring implements that those in the locksmith field utilize. As evidenced, there are quite a large amount of these requisite tools that a locksmith uses on a daily basis at the shop or out in the field which have brought to light not necessarily the method of the locksmith, as they are all different and individual, but the great number of implements the locksmith uses and is skillfully proficient with, if not an expert with, to maintain standards of operation in this type of industry.
There are many devices and equipment required for installing door locks and various other door hardware. A number of various saws will venture to this type of field work such as the compass saw (also known as the keyhole saw), a reciprocating saw, mixed sized hole saws which are used with spade bits to install locks on doors, wallboard (drywall) saws and for good measure I will include here a broom and dust pan, drop cloths and a vacuum cleaner.
An assortment of nails and screws (all different sizes, types, one way, etc.) in addition to a screw gun will be making the rounds with installing doors and door hardware along with a shovel, wood glue, a shim pick and utility knives and blades, strike plates and strike boxes all of various size.
Wood chisels of ranging size are needed when the doors a locksmith is installing locks and other hardware on are made of wood. More you ask? Of course there are more and we wouldn't have it any other way, since the locksmith definitely has more in their arsenal when working on these types of jobs! There is the lever, the cylinder removal tool, multiple filler plates, door reinforcers of various finishes and sizes, a pry bar and a shovel if the need arises.
Acting as a guide, the boring jig is a template for drilling precise cutouts for locks and door hardware and accurate installation holes.
Door locks and door hardware may appear to be simple fixes, something replaceable by almost anyone, but you might want to think again when considering the proper care and attention that must be given.
All to often the do it yourself types and novice handy men have come upon the tasks meant for a locksmith and their tools and felt this it truly is a job they can complete without error. While many of the items written about in this series may sound familiar and easy to use, and perhaps they are easy to use in theory, the job of the locksmith, their experience and time tested accuracy and dependability with the tools of the trade are best left in the hands of the very people who use them on a daily basis. The locksmith.
Locksmith Jobs in California - Are the Thief's Making Better Wages?
The art and science of making and breaking locks is carried out by locksmiths and the profession is known as locksmithing.
Sometimes, referred to as security engineering, a well established method of cracking locks and security systems was known as lock picking. The technology behind making locks has not changed since medieval times. The basic technology involves the 'pin tumbler' methodology. Therefore the role of the traditional locksmith has not changed much. However, with the advent of technology in general and digital and lasers, security systems have undergone a metamorphosis. It is only natural that today's security engineer as he is known as is more adept with laser and computer or digital systems rather than the traditional lock.
In the olden days, a single locksmith would make a lock single handedly. Hours of work with use of files and hammer would produce a single lock. Today the method of manufacturing locks have changed. A same basic design is used with one part being unique to each lock. The role of the locksmith also has evolved where today he is more in repairs rather than manufacturing.
Though their role has reduced in the area of production, certain specialized segments such as family vaults remain the domain of the traditional locksmith. Since these are exclusively designed chances of duplication as in locks which are produced in an assembly line environment.
Locksmiths work out of commercial showrooms, they may be moving around in vehicles and do in-house servicing, employed by a company or forensic locksmiths whose job is to investigate burglaries and unearth evidence for investigations.
A new breed of security engineers or electronic lock servicing locksmiths has emerged. They would work for security companies and design the entire security systems working on access control. The locksmith would evaluate the level of security, the threats and design a security plan according to the threat level. The higher the security level the more expensive it becomes. The locksmith has to do a trade-off between cost and security level for the customer.
The profession of a locksmith has also become specialized. It is common to see locksmiths who deal exclusively on domestic locks and keys, automobile locks. Many have become security consultants. There are various certification levels that a locksmith can acquire today depending on his levels of skills, areas of expertise and experience.
Master locksmith is a term coined by the fraternity of locksmiths who claim to have all round skills. However, many countries now insist on certain Certification and registration requirements before the locksmith can use the tag of Master Locksmith.
With dwindling scope of work due to technological innovations such as digital locks, locksmiths now have increased their scope of work to door hardware, door and window frames, door hinges and electric strikes.
Some common terms used by locksmiths are: Bitting, Bolt stump, Change key, Key blank, Key code, Key origination, Key relevance, Locksmith,Maison key system, Master keying, Rekey, Shear line, Slim Jim (lock pick), Tension wrench, Tubular lock pick.