Locked Out Of Your House And Need A 24 Hour Locksmith Leeds?

What Services Does Your Leeds Locksmith Provide?

  • Commercial Locksmith Services
  • Residential Locksmith Services
  • Emergency Locksmith Services
  • Locked Out Situations
  • UPVC Door And Window Lock Maintenance
  • Rekeying Of Locks
  • High Security Door Locks Installation

 

Do You Have Another Key In Case You Are Locked Out?

There is a popular misconception about locksmiths in Leeds. Many people think that if they lose their keys then the local Locksmith can come to their location, look at the lock, make a mould somehow and then produce a new key. Unfortunately, this is just not the case. If you lose your keys and you don’t have a spare, then the only option that the Leeds locksmith has is to replace the lock. This is where the real cost comes in for a locksmiths services, you are not only paying them for their time and labor, you are also paying for the products that they use to replace your lock.

In most cases locksmiths will carry around everything they need to service their customers. This means that their trucks or cars have replacement deadbolts, doorknobs and even key columns for your car. There may be some occasions that they do not have the necessary items to replace a lock, but overall they will have everything that they need. This does not mean that you have to use them to replace the locks. You can have them remove the old lock and you can do the rest if you like. However, if you aren’t handy, this isn’t recommended.

Now, if you are in a situation where you have broken your key in your lock, then this might be a salvageable situation. Most Leeds Locksmiths can piece together a broken key and make a new key from the broken one. However, the condition of the key is important. If you break the key and there are several pieces and some are slivers, then even the best locksmiths may not be able to do anything with it.

Bent keys are also able to be copied by Mobile Locksmiths. However, in most cases you can take a bent key into a locksmith shop rather than calling a locksmith to you. This depends, of course, on whether the bent key is for your transportation. It is important for you to not attempt to straighten the key yourself as you may end up breaking it or causing enough damage to it to prevent a copy from being made.

 


The Profession of the Locksmith

residential door locks

One of the best decisions I ever made in my 62 years of life on this planet was to become my own boss in a field that is never dull, always challenging, and intrinsically interesting. It was not an early decision. In fact it did not occur to me to enter this field until after I'd already spent ten years as a professional photographer. It came about in an odd way, as many serendipitous things do. But regardless of how it came to be, I consider that decision the one that paved the way for me to spend the rest of my working life in comfort and with a good measure of security.

I've since discovered that many people follow a similar course, turning to locksmithing only after finding themselves unhappy in other jobs. I'm not sure how or why so many discover this particular business when looking for an interesting career. In my case it was a natural progression from a rather unique part-time career I had fashioned for myself: That of installing simple door viewers and doing this door to door. Many times my customers would ask if I could install deadbolts for them while I was at it, and after turning down money a dozen or so times I finally got wise and visited a local locksmith supplier who sold me an install kit and a book of instructions. From what I can tell, others come across this idea by doing Internet searches for home businesses, because ultimately this qualifies as such if you, like I do, run it out of your home and structure it as a Sole Proprietorship. In any case, it is obvious that locksmithing has become a popular choice for a chance at self-employment.

After tiring of door to door selling (which didn't take long to do) I hit upon the idea of cold calling. I was still thinking too small, but at the time I didn't know it. Lesson Number One: Don't do this. I was doing it back in 1981 or so when the stigma attached to such endeavors wasn't quite so strong. I'm afraid that calling people out of the phone book and asking if they'd like to have deadbolts installed just would not fly in the present era of terrorism and business rip-offs.

Still, I owe to this period of hard knocks a good deal. I became efficient at installing locks, rekeying locks, and duplicating keys. It was during this one year period that I scrounged together enough money to purchase a small key duplicator and also a lock rekeying kit. I carried these items in the trunk of my car and carried them into my customer's home when needed. I also purchased several boxes of the most common domestic key blanks and by the time I'd accumulated all this stuff my car's trunk was crammed and I was wishing for more room. Also, and most important, I came to realize that driving around in an unmarked car and working out of the trunk was not lending itself well to my credibility.

Lesson Number Two: Start out with credibility. Purchase a small work van, or a large one if you can afford it. Buy signs or have signs painted on it. Use whatever lending power you have, may it be with banks or with family, to locate a used vehicle and have signage made up, even if this is in the form of magnetic signs. Of course all this suggests you start out as a legitimate business, and this is just my point. Create a name for your business (think long and hard about this, as you'll lose any credibility you might initially gain if you keep changing it), have signs and forms and letterheads made up, and dive in.

There is, too, the question of legality. This is a hard subject to field, because the legality of doing business from one jurisdiction to another can differ widely, and even wildly. It is incumbent upon you to do the research and determine whether or not your jurisdiction requires a locksmith be certified, bonded, and/or licensed. You'll almost certainly discover that licensing is the fundamental hurdle, and that is usually taken care of with the signing of a few forms and the payment of a small annual fee. Certification is something else. Not all jurisdictions require this. In my case I found that the state in which I was then living -- Utah -- did not require it. Nor was I required to be bonded, though I chose to do so for the added protection (it is widely and incorrectly thought that bonding protects the locksmith's customer, whereas in fact it is the locksmith that is protected by the bond).

Lesson Number Three: Do the homework required to determine if acquiring a business license is all that is needed to establish your locksmith service. One phone call to your state's Attorney General office will likely answer that question.

Once you have lined up an affordable vehicle and put a reasonably professional sign on it, you must begin outfitting it. This should, and must, be done before you begin advertising your services because if you are like I was at this point you know next to nothing about the business and not much more about the work. We will endeavor at this point to educate ourselves. Locksmithing is in point of fact one of the few professions left in this world in which a formal education is absolutely UNnecessary. I have spoken to very few professionals during my career who got to be that way through going to a 'locksmith school' or a college. This is certainly not to say that a formal education isn't desirable. If you can afford it, if you have the means, then by all means take that route. This article is for those of you who can't.

The vehicle you purchase will in large part determine how it is to be equipped. I've always preferred a full-size van (I've owned Ford, Chevy and GMC models during my career), but there are many locksmiths who just love the Astro Van or Safari Van made by GM. These minivans are popular with many different professions and are ubiquitous. You can undoubtedly find one in your price range. Either way, the first order of business is to erect a work bench that will give you as much space as possible. Best to have the bench on one side of the van and leave the opposite side for shelves or storage bins. Make it sturdy! There is nothing worse than a wobbly bench when you're trying to rekey locks. Make it level for the same reason.

You'll need a power source. It is excusable to string extension cords until you can afford something better, but bear in mind that this detracts from your professionalism. The ultimate is probably having a RediLine Generator that runs off your van's 12V power. This is not a power inverter, it is actually a generator and it kicks out 110-115V power. They are wonderful sources of AC power and you can even run a bank of fluorescent lamps off one of these for your interior shop lighting. There are several models to choose from with varying outputs, but they are expensive. If you can locate a rebuilt, so much the better. A good inverter might do the trick if you can't afford a RediLine, but be careful. Some key machines (and you're going to have to have one) will not run with an inverter.

Power now available, you need to start out with at least a key duplicator on your bench and preferably, as well, a good code cutting machine. The latter is desirable but not necessary in the beginning unless you plan to launch directly into automotive locksmithing, in which case you'll find it hard to get along without one. We'll touch on that in a moment. Key machines are almost impossible to find used. You'll likely end up buying a small HPC Speedex because they're pretty much the least expensive good key duplicator around. Expect to pay around $500. Best if you include this in your initial loan. A key duplicator is bread and butter for any locksmith, mobile or otherwise, so don't even think about starting up until you have one.

Equip yourself with a good rekeying kit. I've always preferred 'universal' kits because they do the work of dozens of other keyway-specific kits and they are easy to use. LAB makes the best of these, hands down. If you have the space, try to get a metal Classic Kit. If you don't, you can start out with one of LAB's Mini-Durex kits or, better, the miniature version of the Universal Kit (LMK-005 or LMK-003). You simply can't rekey locks without one, and if you get a Universal you won't be confined to keying up one or two brands . . . you'll be able to handle them all. Don't know how to rekey locks? Pick up an instruction manual on the Internet or at Amazon.com. They are available and this is one of the quickest locksmith skills to pick up. While you're at it, buy at least one plug follower, a pair of pin tweezers, and ideally a pair of TruArc pliers. Over time you'll accumulate more rekeying tools but these fundamentals are nearly essential.

Even before I was making money rekeying locks, I was being called to open cars. If you intend to advertise yourself as an emergency service, you're going to have to take in this kind of lucrative work. Let me tell you now, this will be the easiest money you've ever made. It is well worth learning the skills required to open vehicles even if it means spending a couple of hundred dollars on tools and a good manual. Lockouts, at least in my case, virtually supported me for years. If you live in a medium to large city, count on getting lockout calls day and night even if you have only a tiny ad somewhere (a subject for later). There are many good lockout kits available online, to suit any budget, and the same goes for lockout manuals. Do a Google search for 'car opening tools' or 'lockout tools' and you'll have no trouble finding suppliers. Are they legal where you live? Again . . . this is up to you to determine. The supplier cannot and will not endeavor to police this aspect of marketing, as it is simply not possible. I'm not advocating the purchase of anything that is not legal where you reside!

House and business lockouts are likewise lucrative sources of income for the locksmith, but these require different skills, different tools. Here is where it becomes necessary to learn the skill of lock picking -- probably the most fundamental skill of the trade. It is not as easy to learn as car opening and lock rekeying, but it is by no means difficult, either. It requires practice and patience, and it requires good tools. Do not get stingy here. There are lots of cheap lock picking tools for sale. You'll find them in automotive magazines, even. Stick with tools from the established firms like HPC, SouthOrd, Lockmasters, etc. Purchase a beginner's set with a few picks and one or two tension tools for start, unless you have a big budget, then go for a set that will last you a while. Choice of spring steel or stainless steel is largely a matter of personal choice. Whichever one you start out with will likely be the kind you'll stay with, because you'll form an attachment to that type and you'll train yourself to make the best of it. More important is the concept of practice. Buy Practice Locks. Once you've picked all the locks in your home you're going to need more challenges, and now that Practice Locks are an accepted training aid in this field you'd do well to pick up a few of them. Practice until you can repeatedly pick the most challenging of your Practice Locks and then practice some more.

Did I mention that servicing lockouts will likely be the single most lucrative service you offer your customers? I thought so. Good!

There are other aspects to providing a locksmith service and among these is the ability to install locksets on homes and businesses. Primarily you'll be asked to install deadbolts, but later on, as your business gets bigger, you'll want to offer commercial business and real estate companies the option of replacing all their old lock hardware for newer more secure hardware. Again, practice is called for and you should be prepared to install a few unnecessary deadbolts and knobsets on doors in your own home that don't need them. After doing this a dozen or so times, it will be easy to go to that first installation with confidence. You'll need to add a few essential tools to your toolbox, such as a 1/2 inch drill, a couple of hole saws (2-1/8 inch and 1-inch), a 1/2 inch boring bit, and a good wood chisel. With these tools, you can install deadbolts in metal or wood doors. Complete installation kits are available and are the best choice if you can work them into your budget. Need instruction? Books galore available on Amazon.com or at any large scale bookstore in your city.

Once you've accumulated vehicle and the tools, and some knowledge gleaned from practice and reading, you can start thinking about getting your feet wet. The best way to start is the old fashioned way and that is to appeal to family and friends for work and for referrals. Network. Talk to everyone you know and let them know you're serious about this and that you are available. Step two is to advertise and this is absolutely necessary, even if you start out only as a listing in the Yellow Pages. This is where 99% of the people who need a locksmith will look. Newspaper ads, flyers (Yucchhh!), direct mail and radio ads don't work for locksmiths unless you have one enormous budget. Try to justify a small one-eight or one-quarter page Yellow Page ad if at all possible. Even in the face of huge competition, you will get calls and over time your name will be spread around, if you do a good job. Well, it will get spread around if you don't, as well, but you'd do well to avoid that.

That's how I did it. That's how thousands of others have done it, give or take a detail or two. Be sure to cover the legal bases, because if you jump into it and find later that you're acting outside the law, don't come to me! This is part of your research. It is not that difficult to acquire a certification and satisfy local laws that may pertain to this business. If you keep the business small, and maintain yourself as a sole owner, you're going to be profiting right off the bat because overhead with a mobile service is nil.

It's within your reach whether you're 18 or 58.


Car Locksmiths

residential door locks

Before we can discuss ways to prevent a home burglary, it's important to have an understanding of when the burglaries occur, who commits the crimes, and what is usually taken. Almost all home burglaries happen during the day, when people are at work. The summer months see a lot of burglaries, especially in July and August. February actually has the fewest number of burglaries compared to the other months.

Home burglaries are usually committed by males under 25 years old. These guys are usually trying to grab small things that are easy to carry away and sell for quick cash that is needed for living expenses an most often, drugs. The favorite items of theft are cash, guns, jewelry and watches, computers and DVD players, and CDs. These things are easily concealed in a duffel bag as the thief exits the home, and are easy to convert to cash.

Thieves never like to do any extra work if they don't have to, so they first look for an open door or window. And, unlike most movies where the bad guy carries a fancy lock pick kit, burglars prefer to use common household tools like screwdrivers, pliers, pry bars and hammers. Although it may seem like burglaries are random and happen on a whim, this is rarely the case. Burglars will always go for the easiest target. This is the house with the easiest access, good places to hide, and a good escape route.

Burglars always go for the easy target! Most burglars will skip your house if it seems too difficult to enter. So the best way to help prevent a home burglary is to make it difficult for a thief to get in. Most burglars pick a point of entry that has the most cover, and usually has the weakest lock. This is typically the garage door, followed by the back door, and then the front door.

Now let's take a look at some pointers for the types of locks you should consider:

- Use a high quality, heavy-duty, deadbolt lock that has a one-inch throw bolt (The part that goes into the door when locked)
- If you have to use a "knob-in-lock", make sure you get one that's high quality, heavy duty, and has a "dead-latch" feature.
- A "dead-latch" mechanism prevents a credit card or shim from being used to pop open the lock
- A high quality deadbolt will have what's called a beveled casing. This usually stops the use of channel lock pliers to break off the lock pins and gain access.
- Always spend the extra money and get Grade One or Grade Two locks for exterior doors, as these resist prying, hammering, and lock picking.

Expert (But completely obvious) Tip:

Most people leave an extra set of keys in the car. Burglars are wise to this and first look inside your car for house keys and valuables. Make sure you lock your car, even if it's in the garage.

Now let's talk about Doors. Follow these tips below when considering doors in your home.

- Always spend the extra money and buy solid core or metal doors for all exterior entrance points. Many cheap exterior doors have hollow cores, and can easily be kicked through with not much effort by a determined burglar.
- If the door doesn't come with one, install a peephole that is a wide-angle 160°, mounted no higher than 58 inches from the floor.
- Make sure the door comes with a heavy-duty, four-screw, strike plate with 3-inch screws to penetrate deep into a wooden door frame. The strike plate is almost always the weakest part of the door, as it is where the deadbolt secures the door in place with the door jamb. Cheap doors come with very soft wooden moldings that are usually tacked onto the door frame. It just takes a strong kick or shove with a shoulder to tear the lightweight molding away and burst the door open.
- Also make sure that the screws that hold the door hinges in place have at least two 3 inch screws per hinge plate.
- Make sure that the screws holding the knob lock strike plate are longer ones as well.

To Conclude:

We always recommend spending the extra money to get good solid core or metal exterior doors, and strong, heavy duty locks. Remember that an experienced burglar can identify good doors and good locks. It is very likely that the mere presence of these upgrades will cause the burglar to think twice and move onto an easier target.

24 Hour Emergency Locksmith Leeds

Finding A 24 Hr Locksmith Leeds

So you need a locksmith but you are not sure how to find one. You obviously know the basics of checking out recommendations and reviews and doing price comparisons. But you have gotten to where there are just too many locksmiths in Leeds to choose from and you do not know which way to go. You are pretty confident you know what you do want in a locksmith. But do you know what you do not want in a locksmith? When it comes to choosing a locksmith for your needs, it is important to pay attention to those things you should avoid when looking for a locksmith.

Refusal to give an estimate

Locksmiths are experienced in what they do. They are familiar with the variety of services that they offer and they often can give an estimated cost for the service you need. Of course an estimate can change, but generally it will be in the ball park of the ending price. Any locksmith that flat out refuses to offer an estimate is likely not to be trusted.

Refusal to disclose credentials

Locksmiths are generally a proud bunch of professionals. As with any professional service provider, they should have no problems disclosing any education, training or experience that they have. They should also be able to tell you if they are insured or not

Answering the phone generically

If they do not answer with a company name, you might want to steer clear. A locksmith will have a company name and will generally answer as such. If you get a generic answer, simply ask the name of the business and see if the name matches up with the ad you are calling.

What Services Does Your Leeds Locksmith Provide?

  • Commercial Locksmith Services
  • Residential Locksmith Services
  • Emergency Locksmith Services
  • Locked Out Situations
  • UPVC Door And Window Lock Maintenance
  • Rekeying Of Locks
  • High Security Lock Installation

There are many great Leeds  locksmiths  and many great features they offer to customers. By simply avoiding a few things, you can save yourself a lot of headaches and money.

For more information on the areas our 24 hour Locksmith Leeds  serves check out the pages below:


Locksmiths Tools of the Trade - In the Field - Lock - Door Installations

lock door

Are you thinking about becoming a locksmith? Many people ask me about my profession when I arrive at a job site. The idea of working with the public, working with hand tools, making a quick buck on lock-out calls, and of course the power and ability to unlock doors, cars and safes is quite intoxicating for some people. I don't place help wanted ads, but nevertheless I average one unsolicited résumé a month via e-mail. Usually it arrives from an eager teenager looking to do an apprenticeship. O.J.T. (on-the-job training) is a fine way to go if you can get the gig. That's precisely how I started. That and reading every trade magazine I could get my hands on, endless hours doing research on the web, taking classes, attending trade expos, and talking with any locksmith who would take the time to chat with me (and many would, so long as I wasn't one of their competitors). But that's how it is for most lock jocks. Once you begin work as a locksmith it gets under your skin. It consumes you and becomes an obsession. That's not exactly a bad thing after all; to be (God willing) financially successful at what you enjoy is a great way to pay the bills. There is, however, a price to pay that does not fit with most people's lifestyle, and thus -- the purpose of this article.

The Good: Helping the public and making a few bucks while doing it. First off, I rarely charge to unlock a car or house when there is a child locked inside. When I get the call, usually from a panicked parent declaring his or her child is locked inside a car, I rush to the scene. There are few better moments for me as a locksmith than seeing the relief in a mother's eyes when I unlock the door and she pulls her child from a sweltering car on a warm summer day. "You're my HERO," she says as she holds her child close with tears in her eyes. "No charge ma'am. We don't charge for children locked in cars. If you like, for a small fee, I can make you a copy of your car's door key so it's less likely to happen again." They almost always say yes, and the payment for the key usually accompanies a tip. The "up sale" is simply to cover my gas going out on the call, and the tip, if any, buys me lunch.

The rest of my jobs are typically for-profit jobs. Still, over half of what I charge goes right back into the company in the form of gas, insurance, advertising, trade organization dues, license fees, vehicle maintenance, tools, supplies, and other expenses.

As a locksmith you will never get rich, but if you play your cards right you could retire well. The plan, as I read in a popular trade magazine, is to sell a well-established shop with a long list of customer accounts, while owning and collecting rent on the property the shop sits on. It's even better if you own an entire complex and collect rent from your shop's neighbors, too. I personally know a retired locksmith who did exactly this and I understand he is doing quite well for himself.

Many locksmiths make and sell tools and/or reference books, or teach classes (as I do) to supplement their income.

The Bad: Being on call 24/7. After-hours and weekend service can account for a large part, if not most when first starting out, of your income. Then there are the late night calls. 2am, half drunk and he can't find his car keys: "I'm sorry sir -- I can't help you drive your car tonight, but if you call me in the morning I will be happy to assist you."

The locksmith industry is a highly regulated (but necessarily so) security industry. The licenses, insurances, and bonds you have to carry can cost a small fortune. I have a city business license, a state locksmith license, a State Contractor's License for lock and security work, two insurance policies (general liability and commercial vehicle insurance), two different bonds, and I am a member of two major national trade organizations. In California, you need to be fingerprinted and pass State and Federal background tests. I am also a member of some local organizations including the Chico Chamber of Commerce and the North Valley Property Owner's Association.

The cost of running a business like this can be overwhelming and there is always another tool you need to buy, another software update, or replacement parts/tools that need to be ordered. I am currently saving up for a high security key machine that retails for $5,800.

Let's not forget the paperwork. You will need to keep legal forms for customers to fill out and detailed records of who, what, where and when. The last thing you want to do is make keys to a car or house for someone who does not have authority to hold a key to that property.

Lastly, buy a nice shirt and tie because there is a good chance you will find yourself in a court of law before long for, among other things, domestic disputes.

The Ugly: Evictions, repossessions (R.E.O.'s), and re-keys after a domestic dispute. There are few things as humbling in this profession as writing a bill for after-hours service and handing the new keys over to someone wearing a fresh black eye. I vividly remember one woman who was standing next to a hole in the drywall where her head was forcibly inserted only a few hours earlier. The local sheriffs know me because it's not uncommon to perform the re-key and security checks while they are still there, filling out their report.

Can you say fleas? Yep, now I keep flea powder in the van because you never know what condition a recently foreclosed house will be in.

Angry former tenants who have been kicked out can also present a challenge. Sometimes the locks are disabled or destroyed, and I keep latex gloves in the van in case I ever have to pick open another lock that has been urinated on.

The bottom line: I am quite happy being a locksmith, most of the time. The pay, the freedom of the job (I can leave my schedule open if my kids have a school event), and the satisfaction of helping people while making a profit for myself keeps me going.

My advice to you:

1. Do your research before entering the market as a locksmith. My town has too many locksmiths per capita. There is barely enough work to go around much of the time.

2. Get on with another locksmith and be willing to relocate, as you may be required to sign a "no compete" contract saying you will not leave to be your boss's competitor. Locksmith schools are okay, but a seasoned locksmith can show you some tricks of the trade that can help you make higher profits or perform jobs better and quicker than the basic skills taught in most schools.

3. Be willing to pay your dues. It will take many years to build up a customer base, and a name for yourself. A wise locksmith once told me it takes at least three years before they (the customers) know you're there, and seven before they notice you are gone.

4. When you start out on your own, get an easy to recognize logo and put it on everything: your van, invoices, pens to hand out, and every other piece of advertising (see our logo below).

5. C.Y.A. Document everything and have pre-printed, professionally prepared, legal forms for your customers to fill out.

6. Don't get too carried away. If you have other obligations, like a spouse and/or kids, make sure to make time for them. It's hard to turn the phone off, or turn down calls because you're turning away money, but you can't get back the days you miss.

A former employer of mine occasionally tells the story of how he made $2,000 in one weekend dispatching calls to his on-call locksmith, while he was on a boat on Lake Shasta with his wife. It was a rare weekend vacation for them and he spent a good part of the day on the phone. She died of cancer two short years later, and he later told me he would give just about anything to have that day back. I know this story personally as I was the on-call employee that weekend.

To quote Uncle Ben (from Spider-Man, the movie): "With great power comes great responsibility." The ability to unlock doors, bypass alarm systems, unlock safes, and the inside knowledge of customers' security systems has been the downfall of unscrupulous locksmiths. In short, if you can't handle the temptation, don't pursue the profession.

Finally: Never take advantage of someone. Like Grandpa always said, it can take a lifetime to build up a good reputation but only a moment to ruin it.

Good luck in whatever you decide -- unless, of course, you are planning to open a lock shop in my service area.


Locksmith Jobs in California - Are the Thief's Making Better Wages?

mobile locksmith near me

The art and science of making and breaking locks is carried out by locksmiths and the profession is known as locksmithing.

Sometimes, referred to as security engineering, a well established method of cracking locks and security systems was known as lock picking. The technology behind making locks has not changed since medieval times. The basic technology involves the 'pin tumbler' methodology. Therefore the role of the traditional locksmith has not changed much. However, with the advent of technology in general and digital and lasers, security systems have undergone a metamorphosis. It is only natural that today's security engineer as he is known as is more adept with laser and computer or digital systems rather than the traditional lock.

In the olden days, a single locksmith would make a lock single handedly. Hours of work with use of files and hammer would produce a single lock. Today the method of manufacturing locks have changed. A same basic design is used with one part being unique to each lock. The role of the locksmith also has evolved where today he is more in repairs rather than manufacturing.

Though their role has reduced in the area of production, certain specialized segments such as family vaults remain the domain of the traditional locksmith. Since these are exclusively designed chances of duplication as in locks which are produced in an assembly line environment.

Locksmiths work out of commercial showrooms, they may be moving around in vehicles and do in-house servicing, employed by a company or forensic locksmiths whose job is to investigate burglaries and unearth evidence for investigations.

A new breed of security engineers or electronic lock servicing locksmiths has emerged. They would work for security companies and design the entire security systems working on access control. The locksmith would evaluate the level of security, the threats and design a security plan according to the threat level. The higher the security level the more expensive it becomes. The locksmith has to do a trade-off between cost and security level for the customer.

The profession of a locksmith has also become specialized. It is common to see locksmiths who deal exclusively on domestic locks and keys, automobile locks. Many have become security consultants. There are various certification levels that a locksmith can acquire today depending on his levels of skills, areas of expertise and experience.

Master locksmith is a term coined by the fraternity of locksmiths who claim to have all round skills. However, many countries now insist on certain Certification and registration requirements before the locksmith can use the tag of Master Locksmith.

With dwindling scope of work due to technological innovations such as digital locks, locksmiths now have increased their scope of work to door hardware, door and window frames, door hinges and electric strikes.

Some common terms used by locksmiths are: Bitting, Bolt stump, Change key, Key blank, Key code, Key origination, Key relevance, Locksmith,Maison key system, Master keying, Rekey, Shear line, Slim Jim (lock pick), Tension wrench, Tubular lock pick.

Back to our Local Locksmith homepage